校罗差时磁偏差设定为零的机理分析

在飞机地面通常检查时,磁差给定器磁偏差值往往设定为当地磁差,才能得到正确的航向。校正磁罗差时,只有将磁差给定器设定为000.0,不然罗差计算会大大溢出指标。文章通过磁罗差校正的原理和校正方法的论述,进一步分析了校罗差时将磁偏给定器设定为000.0的工作机理。     

野战环境下大型飞机超低空气动特性分析

针对野战环境下的大型飞机超低空飞行,采用CFD方法对地面存在前向或横向不对称障碍物时地面效应对气动参数的影响进行了数值分析,包括纵向稳定性和侧向摇晃等问题.研究结果表明,野战等非常规飞行条件下,地面不确定障碍物会造成大型飞机稳定性变差,严重时可能出现纵向点头和横侧向摇晃现象,容易导致触地危险.最后,从现代飞行控制理论角度提出了对常规布局大型飞机进行闭环控制的研究思路.     

航天飞机简化模型流场测量

叙述航天飞机简化模型流场测量与观察，进行了旋涡场测量，机身压力分布测量和组合体的油流观察。试验Ｍ数为０．４，０．６，０．８，１．５，攻角为０°，６°，８°，１０°，１２°，１５°，１７°和２０°。分析三种方法所得结果，符合得很好     

Large-scale Coronal Heating, Clustering of Coronal Bright Points, and Concentration of Magnetic Flux

By combining quiet-region Fe XII coronal images from SOHO/EIT with magnetograms from NSO/Kitt Peak and from SOHO/MDI, we show that the population of network coronal bright points and the magnetic flux content of the network are both markedly greater under the bright half of the large-scale quiet corona than under the dim half. These results (1) support the view that the heating of the entire corona in quiet regions and coronal holes is driven by fine-scale magnetic activity (microflares, explosive events, spicules) seated low in the magnetic network, and (2) suggest that this large-scale modulation of the magnetic flux and coronal heating is a signature of giant convection cells. This revised version was published online in June 2006 with corrections to the Cover Date.     

气体自发光在高超声速流场显示中的应用

提出了利用高焓气体自发光作为高超声速流场显示的方法，介绍了在使用高焓运行的激波风洞中，对二维模型的高超声速绕流流场使用此种方法的初步结果，可观察到二维棱形柱的尾流和马赫波的相交。结果表明此种方法不需外加光源，对于结构限制无法设置透明部件的模型，无疑是简单可行的。     

GRACE gravity field modeling with an investigation on correlation between nuisance parameters and gravity field coefficients

The GRACE (Gravity Recovery And Climate Experiment) monthly gravity models have been independently produced and published by several research institutions, such as Center for Space Research (CSR), GeoForschungsZentrum (GFZ), Jet Propulsion Laboratory (JPL), Centre National d’Etudes Spatiales (CNES) and Delft Institute of Earth Observation and Space Systems (DEOS). According to their processing standards, above institutions use the traditional variational approach except that the DEOS exploits the acceleration approach. The background force models employed are rather similar. The produced gravity field models generally agree with one another in the spatial pattern. However, there are some discrepancies in the gravity signal amplitude between solutions produced by different institutions. In particular, 10%–30% signal amplitude differences in some river basins can be observed. In this paper, we implemented a variant of the traditional variational approach and computed two sets of monthly gravity field solutions using the data from January 2005 to December 2006. The input data are K-band range-rates (KBRR) and kinematic orbits of GRACE satellites. The main difference in the production of our two types of models is how to deal with nuisance parameters. This type of parameters is necessary to absorb low-frequency errors in the data, which are mainly the aliasing and instrument errors. One way is to remove the nuisance parameters before estimating the geopotential coefficients, called NPARB approach in the paper. The other way is to estimate the nuisance parameters and geopotential coefficients simultaneously, called NPESS approach. These two types of solutions mainly differ in geopotential coefficients from degree 2 to 5. This can be explained by the fact that the nuisance parameters and the gravity field coefficients are highly correlated, particularly at low degrees. We compare these solutions with the official and published ones by means of spectral analysis. It is found that our solutions are, in general, consistent with others in the spatial pattern. The water storage variations of the Amazon, Chari and Ganges river basins have also been computed. The variations computed with the NPARB approach are closer to those produced by JPL and DEOS solutions, while the variations produced with the NPESS approach are in good agreement with those produced by the CSR and GFZ solutions. A simulation study is implemented with considering realistic noise and low-frequency error. The two approaches are used to recover the true model. The NPESS solution appears closer to the true one. Therefore we are inclined to estimate the nuisance parameters simultaneously with the geopential coefficients.     

内外分区空间统一精度场建立方法研究

针对内外分区空间内结构和设备安装的数字化测量需求,研究内外参考点之间的关联技术,构建与外测量精度场相统一的内测量精度场。对于内外空间不同的开口数,利用多测点定位法、二测点和水平仪单站位定位法、二测点和水平仪双站位定位法等方法建立内精度场,实现与外精度场的统一。以某型设备为例进行试验表明,利用内外精度场测量同一检测点进行比较,测量的最大不一致误差为0.14 mm,证明构建模式可行、简单、可靠。     

双脉冲发动机点火过程三维数值模拟

以喷射棒式双脉冲发动机燃烧室、级间隔离装置和喷管一体化为研究对象,采用数值仿真技术对Ⅱ脉冲点火过程三维流场特性进行分析研究。计算结果表明,点火初期燃气压力波峰超前于火焰峰到达级间隔离装置,并以压强冲击波形式传播,Ⅱ脉冲燃烧室相对高压区位置不断发生改变;级间孔打开过程对药柱末端压强影响较大,但对Ⅱ脉冲燃烧室压强整体上升过程影响较小;级间孔打开后,燃气经级间孔加速后形成高度欠膨胀射流,并在Ⅰ脉冲燃烧室内形成非对称带状低压区;级间孔分布的非对称性,导致压强及温度在发动机燃烧室中呈现显著的三维分布特性;高温区出现在隔板附近,而在装药前端、装药末端及外围级间孔轴线附近出现低温区。     

基于空间两点的视觉自主着陆导引算法设计

为提高无人机着陆效率,从着陆速度向量场和导引律设计两方面研究改进。首先,基于椭圆设计速度向量场,实现飞行路程更短、机动性能要求更低的着陆轨迹。然后,基于像素坐标系与机体坐标系的关系,设计无人机的航迹方位角指令;以椭圆切线方向为参考,结合合作矢量特征,设计航迹倾斜角指令;利用图像信息,设计速度大小指令。最后,理论比较了传统轨迹与提出轨迹对方向机动性性能的要求,给出了轨迹参数与无人机方向机动性性能的关系。利用Simulink搭建系统仿真平台,计算满足要求的合作矢量特征。结果表明,无人机以曲线轨迹准确软着陆到目标,满足实际运用的需要。      

大功率无电极高密度等离子体电磁推进概述

无电极高密度等离子体电磁推进技术已成为未来深空探测、载人航天和货运、太阳能电站以及航天器在轨服务与维护等空间任务中极具竞争力的核心推进技术之一。在梳理不同无电极等离子体电磁加速机制基础上,开展大功率无电极高密度等离子体电磁推进技术性能对比,给出新概念无电极场反构型电磁推进技术向未来超大功率拓展的优势和发展潜力,同步分析了该技术亟需解决的关键基础问题,旨在为中国新概念场反构型电磁推进技术的研发提供理论基础。